Engraving Request & Tag Builder | INVICTUS Industries

STEP 1 What are we engraving?

Choose the closest match so we can show the right design tools. This is an engraving request; hose testing is a separate service.

Hose tagFlat ID tag for a hose assembly. Engraving only; testing is requested separately.Flat plateEquipment, asset, or identification plate in your requested size.Custom itemTumblers, curved or shaped items, parts, and one-off projects.

Upload a logo, artwork, or item photo

For tags and plates, attach your logo or artwork. For a custom item, a photo or drawing helps us review the surface. PNG/JPG/SVG files preview on flat plates; artwork for hose tags and custom items is attached for INVICTUS to review. PDFs attach to the request. One file up to 4 MB.

Custom item · no flat-tag preview

For tumblers, curved or irregular surfaces, shaped parts, or one-off projects, the flat tag preview could be misleading. Describe the item and the area you want engraved, then attach a photo or drawing. INVICTUS will review material compatibility and confirm whether we can do the work before quoting.

Step 3 · Build your tag or plate

Enter the size and wording to build a proportional layout preview. It grows or narrows with the dimensions you enter.

Width (inches) *

Height (inches) *

Text alignment

Letter style

Preview finish

Text linesAdd, remove, or reorder lines. Each line has its own size and position controls. Lines stay inside the plate work field; overlap is flagged for you to adjust.

Line 1

Line 2

Line 3

Up to 8 lines. Use the arrows to put the information in the order you want.

YOUR TAG PREVIEW

Preview updates as you edit.

The tag shape follows the entered inch dimensions proportionally. The on-screen drawing scales to fit your display; it is not a 1:1 physical measurement.

Fine-tune text position

Move all text together in 0.05-inch steps. The preview blocks moves that would place text outside the plate or over a mounting hole.

X 0.00 in · Y 0.00 in

Use the arrows to shift the text block.

Mounting hole builder

Choose a common pattern or select Custom, then click the tag preview to add or remove holes. Hole centers stay at least 1/4 in. from the plate edge; rounded corners or larger holes may place them farther in.

Hole pattern

Hole diameter (inches)Nonstandard sizes may need a custom review.

Add countersinking, if feasible

Select a pattern to preview mounting holes.

Step 4 · Your current estimate

Building an estimate from your tag layout…

BUDGETARY ESTIMATE—Engraving, setup, and mounting work are itemized as your choices change.

The estimate updates as you design. Dense layouts, oversized tags, unusual hole sizes, and large runs may require a custom review. Final price is confirmed after reviewing the material and artwork.