INDUSTRIESABOUT INVICTUS · SOUTH HUTCHINSON, KANSAS
Two services.
Shop-built.
INVICTUS Industries provides shop-based hydrostatic hose testing up to 7,000 PSI and standalone laser engraving for tags, plates, and custom items. Our work is based in South Hutchinson, Kansas. The station below is an interactive fictional demonstration of pressure control—not a live test, operating procedure, or installation drawing.
THE PRESSURE LABINVICTUS / VISITOR CONTROL CONSOLE / 01
SIMULATED PRESSURE
0PSI
YOUR TARGET1,500 PSI3-second demo hold
You’re at the controls.Start the pump. Choke down the valve near target. Then Hold.
CLOSEDFINE CONTROLFULL OPEN
Choke down near the target, then press Hold. Closing the valve retains pressure.PRESSURE / TIMEDEMO LIMIT: 1,800 PSI
Fictional pressures, timing & failure effects.
Simulation only—not equipment controls or operating guidance.
Simulation only—not equipment controls or operating guidance.
Find your rhythm.In Manual challenge, press Start. Adjust the needle valve to change the speed of the pressure ramp.
Catch the green band.Choke down near the target, then press Hold for the three-second demo countdown. Pressure stays held.
Release when you’re ready.Press Release to vent the demo assembly. Overpressure halts the demo with an alarm. Release pressure before resetting. Automatic cycle shows the complete sequence.
Ready to test your actual hoses?
INVICTUS offers shop-based hydrostatic hose testing up to 7,000 PSI in South Hutchinson, Kansas, with local drop-off and pickup. Send your assembly details so we can confirm testing requirements, pricing and scheduling.